Clinker Ore Milling Equipment Operation

Clinker Ore Milling Equipment Operation

Clinker Ore Milling Equipment Operation

Clinker Ore Milling Equipment is widely used in the construction materials, metallurgy, chemical industry, mining and other mineral materials in the field of grinding and processing, processing Mohs hardness below 7 below the material, humidity below 6% of various non-flammable Explosive materials, the fineness of the finished product can be arbitrarily adjusted between the 325 mesh. Through the combined action of the analyzer and the fan, it can meet the needs of different users. Some improper operation of the Ore Milling Equipment may cause some small Problem, in order to prevent the legislation to use the right to prevent the occurrence of accidents, need to pay attention to the following problems.

  • 1, in order to make the Ore Milling Equipment normal, should be set up “equipment maintenance and safe operation of the system” to ensure long-term vertical operation safe Ore Milling Equipment, at the same time have the necessary maintenance tools and grease and the corresponding accessories.
  • 2, Clinker Ore Milling Equipment roller device used for more than 500 hours to replace the grinding roller, the roller sleeve of the rolling bearings must be cleaned, damaged parts should be promptly replaced, refueling tools available manual pump and grease gun.
  • 3, Clinker Ore Milling Equipment in the process of using, there should be fixed personnel responsible for custody, the operator must have a certain level of technology. Clinker Ore Milling Equipment before installation on the operator must carry out the necessary technical training to understand the principle of Clinker Ore Milling Equipment performance, familiar with the operating procedures.
  • 4, Clinker Ore Milling Equipment use for a period of time, should be overhauled. At the same time, wear-resisting parts such as grinding ring grinding ring blades are subjected to overhaul and replacement. Before and after the roller grinding apparatus is used, the connecting bolt and nut should be carefully inspected to see if there is looseness and whether lubricating oil is sufficient.

Leave A Comment

Required fields are marked *. Your information will not be published or shared.