Gold Ore Refining Process Equipment China

Gold Ore Refining Process Equipment China

Gold Ore Refining Process Equipment discharge granularity

For the milling industry, the size, size and quality of the Gold Ore Refining Process Equipment determine whether it is a high-quality equipment. The size of the discharge granularity is the judgment of the processing enterprise when purchasing. The Science and Technology Group introduced to you what factors affecting the particle size of the Gold Ore Refining Process Equipment.

In the process of Gold Ore Refining Process Equipment processing, the user must grasp the relationship between the various influencing factors, in order to achieve good production results. Sometimes the product will not meet the requirements of the granularity of the finished product. At this time, the user should observe and test its production and balance the relationship between the factors. In order to control the granularity of the product, the user must strictly grasp the relationship between these factors.

The Gold Ore Refining Process Equipment analyzes the blade wear —— the blade of the analyzer is circularly distributed. In the production, the blade will also wear out over time, and the wear directly leads to the lowering of the analyzer. The efficiency of the powder, the coarse powder also enters the inside of the dust collector, affecting the size of the discharge.

Wear of grinding roller and grinding ring of Gold Ore Refining Process Equipment — Because the working load of the mill is large and the running time is long, it is easy to wear. The occurrence of wear can result in insufficient grinding of the material, and the finished product size will not achieve the desired effect.

Gold Ore Refining Process Equipment Fan Speed ​​—— In production, due to the difference in feed particle size itself, if the wind is too large, the lighter material will be blown into the dust collector even if it does not meet the fineness requirements. Conversely, if the material is large and the wind is too small, the discharge will also be affected. Therefore, fan speed is an important factor in the entire production process.

Gold Ore Refining Process Equipment —— host speed. In the actual production process, it is important to control the speed of the main engine. If the host speed is too high or too low, it will have a great impact on the product’s discharge size. Since the gear unit and motor of the grinding equipment are linked by the accessory shaft of the Gold Ore Refining Process Equipment, we can adjust the speed by adjusting the current of the motor.

Leave A Comment

Required fields are marked *. Your information will not be published or shared.