Vertical Ore Milling Equipment Emergency Stop

Vertical Ore Milling Equipment Emergency Stop

Vertical Ore Milling Equipment Emergency Stop

  • 1, vertical Ore Milling Equipment main motor load, or grading equipment, hoisting machines and other auxiliary equipment motor load exceeds the rated current value, by reducing or stopping the feed processing were not significantly reduced;
  • 2, the main motor or auxiliary motor temperature exceeds the specified value, or the motor burned, vertical Ore Milling Equipment main bearing and drive bearing temperature exceeds the specified value;
  • 3, grinding hopper silo or feeder material, a short period of time can not be restored to feed. Feeding automatic control system failure can not be repaired in time;
  • 4, raw materials full library, no longer receive capacity;
  • 5, edge drive vertical Ore Milling Equipment size gear meshing sound is not normal, there is greater vibration. Reducer abnormal sound or vibration larger;
  • 6, the size of bearing feet and bearing cap bolts serious loosening, the oil ring does not turn and pulling invalid; or pump failure, tubing blockage, to make the lubrication system lost its role;
  • 7, vertical Ore Milling Equipment liner, retaining ring, compartment board, grinding door, hollow shaft fixing bolts off off, liner falling, partition board damage and so on;
  • 8, into the grinding water pressure drop (wet grinding), cooling water barrier;
  • 9, Auxiliary equipment mechanical failure occurred;
  • 10, dust collecting equipment failure can not be ventilated and dust collection.

Leave A Comment

Required fields are marked *. Your information will not be published or shared.