HCS single cylinder hydraulic cone crusher advantages
HCS single-cylinder hydraulic cone crusher is a kind of cone crusher produced by the company. Unlike spring cone crusher, spring is used to adjust the size of discharge opening and the top of spring cone crusher. The discharge opening adjustment device is the same as the multi-cylinder hydraulic cone crusher, and is also used for the topping device, but unlike the multi-cylinder hydraulic cone crusher, the single-cylinder hydraulic cone crusher has only one hydraulic cylinder, and The multi-cylinder hydraulic cone crusher has four hydraulic cylinders. The hydraulic cylinder in the single-cylinder hydraulic cone crusher is used to adjust the size of the discharge opening; it can also be used to open the top cover of the cone crusher, replace the broken wall and the rolling wall and machine maintenance; When the iron is over, the iron block is discharged from the crushing chamber; it can also be used to crush the cavity. The advantages of the HPC single cylinder hydraulic cone crusher are as follows.
The single-cylinder hydraulic cone crusher is no more than a multi-cylinder hydraulic cone crusher. Its structure is relatively simple and there is only one hydraulic cylinder. The simple structure means that the various components of the machine are compact, and the simpler the structure of the machine, the lower the failure rate, the stronger the reliability, and the more stable the operation of the machine.
When the discharge granularity of the discharge opening of the machine does not meet the requirements or the iron phenomenon occurs inside the crushing chamber of the machine, the hydraulic cylinder above the machine can realize the dynamic adjustment of the discharge opening, which can be adjusted to be large or small, and can also be automatically adjusted when the iron is over-ironed. Discharging reduces machine downtime and reduces machine opportunity costs.
The inclination of the moving cone assembly of the machine is relatively high, the material discharge speed is fast under the action of gravity, and the passing ability is strong, so the output of the cone crusher is high, and the high output means that the output is more under the same conditions, then The crushing efficiency of the machine is high and the production cost is low.
The machine uses a constant crushing cavity design that ensures stable production. The user knows that the wear rate of the wear parts is relatively fast. As the wear parts wear during the operation of the cone crusher, the distance between the broken wall and the bottom of the rolling wall becomes larger, which means the material The larger the discharge particle size, resulting in the material discharge is not constant, which is a very annoying phenomenon in the production process, and the constant crushing cavity design can make the wear-resistant parts feed and production capacity in the wear cycle. Keep it constant, which is obviously not possible with the general wear parts design. This design not only solves the user’s troubles, but also increases the production of constant-grained materials while reducing the operating cost of the machine.