Underground Mining Equipment installation steps
As the mainstream production equipment in the mining equipment industry, the application of Underground Mining Equipments has spread to many industries, such as construction, chemical, metallurgy and minerals, etc., and with the development of technology, the application performance of Underground Mining Equipments has been continuously improved, meeting each Production needs of a variety of industries. It is worthy of the attention of the users that the production capacity of the Underground Mining Equipment is very strong, but if it is not in accordance with the requirements during the installation process, or if it is not standard, then various failures will occur during the use process. The Industrial Technology Group will share with you the standard installation steps of the Underground Mining Equipment and how to solve the sudden failure.
When installing the test, the Underground Mining Equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts. When installing, pay attention to the vertical direction of the main body. It is also necessary to configure the power cord and control switch according to the power of the equipment; to check whether the bolts of each part are loose, and whether the door of the Underground Mining Equipment is tight, if it is found, it should be tightened immediately; after the inspection, the empty load is carried out. After the test, after the test is normal, the production can be carried out.
In addition, in the details of many Underground Mining Equipment failures, the host oil leakage is one of the faults that are worthy of the attention of the customers. After the long-term use of the mainframe, if the maintenance is not timely, sometimes the Underground Mining Equipment main engine leaks. The phenomenon of oil, then how to solve this phenomenon well? Many parts of the Underground Mining Equipment use advanced oil seals. If the oil seal is damaged or the oil seal is broken due to the high pressure oil gun, these are the main factors for oil leakage. In addition, the viscosity of the oil is too large, and the oil pump will cause oil shortage and heating. Customers are advised to have clear requirements for the label and viscosity of the oil according to the model specification of the Underground Mining Equipment purchased.
Once a Underground Mining Equipment fails, it will affect the normal production of the user. If it is serious, it will bring certain economic losses. Therefore, the users must strictly follow the requirements when installing the Underground Mining Equipment, and also in the process of use. Do daily maintenance work. As a professional Underground Mining Equipment manufacturer, Shanghai Shibang Industrial Technology Group welcomes customers to purchase.