Raymond Mill bearing
Guide: The bearing of the Raymond Mill is one of the very new components, which is directly related to the operation of the equipment, so it is necessary to deal with the various conditions of the components and ethics in time. This article mainly introduces the solution after the bearing rains.
The operation of the Raymond Mill has a great relationship with the various components inside the equipment, especially the bearings, which are the necessary components for the normal operation of the Raymond Mill and one of the core components of the machine. There will be failures. This is an inevitable phenomenon when the machine is in use. The bearings will also encounter some faults. The longest one is the rust problem after the rain. Because of the working environment of the Raymond Mill, the machine is When it is used, the rain phenomenon occurs from time to time, and even if the equipment is operated in the factory, the humid air after the rain has an effect on the steel products bearing the bearings. In both cases, rust will occur, in order to prevent rust. The impact of the team and the Raymond Mill should be dealt with in a timely manner. Here is how to handle the bearing after the rain.
When the main bearing is rusted, you can apply a layer of lubricant on the surface according to the situation, or use a fine sandpaper to look for it. If the auxiliary bearing is rusty, you can consider replacing it. It is also possible to put the bearing in the diesel oil and soak it in a little, then it can be polished. This is a common treatment method after the bearing is rusted. It is not only simple and easy, but also can prevent rust from running on the Raymond Mill.
Maintenance of the Raymond Mill is inevitable, but no matter what kind of maintenance measures are based on reducing operating costs, although the bearings can be replaced, no one will choose This method, because it is unfavorable for the reduction of production cost, and the rust of the bearing is a common problem, so in the face of this problem, we should find ways to extend the service life of the bearing instead of replacing it, so after the rain on the bearing The rust situation is mainly solved by the lubricant described above.